57
On Screen Display Information
In any mode with the exception of VOICE RECORDING
mode, you can check the recording status in the LCD
monitor or select the power save mode.
[Full OSD] [Histogram] [Basic OSD] [Save mode : LCD off]
Histogram shows you the distribution of brightness in
recorded images. If the bars in the histogram are higher
towards the right, the image may be too bright. If the bars
are higher on the left, the image may be too dark. If the
lighting conditions are too bright to check the subject by
using the LCD, checking the histogram will enable more
precise exposure control for the shots.
Pixel
Dark Bright
Distribution of brightness
Idle mode : If you select the [SAVE MODE] and the camera isn't operated during the
specified time(about 30 SEC.), the camera power will be idle (LCD monitor : OFF,
Camera status lamp : Blinking) automatically. To use the camera again, press
any of the camera buttons except the power button. If there is no operation during
the specified time, the camera power will be turned off automatically to save
battery life. Refer to page 95 for more information about the auto power off
function.
Full OSD
Histogram
Basic OSD
Save Mode
OSD Information