Troubleshooting
Symptom |
| Checklist | |
|
|
| |
Motor does not start. | • | Check the cable, the power plug and outlet. | |
|
| ||
| • Check if there is any blockage, and remove it if required. | ||
Suction force is gradually | • | Please check the filters, and if required, clean as illustrated | |
decreasing. |
| in this manual. | |
| – If filters are out of condition, replace them with new | ||
|
| ||
|
| ones. | |
Cord does not rewind | • | Pull the power cord out 2 - 3 m and press the Cord rewind | |
fully. |
| button. | |
Body overheating | • Check the filters, and clean as illustrated in this manual if | ||
| required. | ||
|
| ||
Static electricity | • | Reduce suction. | |
• This may also occur when air in the room is very dry. | |||
discharge. | |||
| Ventilate the room so that air humidity becomes normal. | ||
|
| ||
| • This vacuum cleaner has a special thermostat that protects | ||
|
| the motor in case of its overheating. If the vacuum cleaner | |
|
| suddenly shuts off, turn off the switch and unplug the | |
During using, stop the |
| vacuum cleaner. Check the vacuum cleaner for possible | |
unit |
| source of overheating such as a full dustbin, a blocked | |
|
| hose, pipe, or clogged filter. If these conditions are found, | |
|
| fix them and wait at least 30 minutes before attempting to | |
|
| use the vacuum cleaner. | |
Noise from the vacuum | • Disassemble the | ||
| remove dust in it. | ||
cleaner increases and the |
| ||
• | After cleaning the | ||
suction power is weak |
| correctly in the dustbin. | |
|
| ||
|
|
| |
APPENDICES
English 19