Troubleshooting

PROBLEM

SOLUTION

 

 

Motor does not start.

• Check cable, pulg and socket.

• Leave to cool.

 

 

 

Suction force is

 

gradually decreasing.

 

 

• Check for blockage and remove.

In operation, the

• Please unclog the intake.

vacuum cleaner stops

 

after repeating runs

 

and stops three times.

 

Cord does not rewind

• Pull the cord out 2-3 m and push down the cord rewind button.

fully.

 

 

 

Vacuum cleaner dows

• Check hose and replace if required.

not pick up dirt.

 

 

 

Low or decreasing

• Please check fi lter and, if required, clean as illustrated in the

instructions. if fi lters are out of condition change them to new

suction.

ones.

 

Body overheating.

• Please check fi lters, if required clean as illustrated in the

instruction.

 

 

 

Static electicity

• Please decrease power suction.

• This can also occur when air in the room is very dry.

discharge.

Please ventilate the room till air humidity becomes normal.

 

The vacuum cleaner

• In order to protect the motor in the cleanr, it rotates slowly when

you just turn on the cleaner.

makes a strange

(Before the motor stabilizes,) this causes the loud noise at the

noise.

initial state and it is not failure in the machine.

 

22_ Troubleshooting