2OPERATING THE CLEANER 1

2-1 POWER CORD

2-2 ON/OFF SWITCH
NOTEGrasp the plug to disconnect cord from the electrical outlet.

2-3 POWER CONTROL

1) BODY-CONTROL TYPEMIN = For delicate surface e.g. net curtains.MAX = For hard floors and heavily soiled carpets.2) REMOTE-CONTROL TYPE

CONTROL-BUTTON RECEIVER

SENDER

POWER LAMP

Press control button repeatedly to select correct mode.

(STOP ➝ MIN ➝ MID ➝ MAX ➝ STOP)

When pushed the “ON/OFF” switch button, the Power lamp is turned on automatically.

INFRARED-CONTROL

ON/OFF switch button

2-4 AIR CONTROL

To reduce suction for cleaning draperies, small rugs, and other light fabrics, pull the tap air until the hole is open.

BODY CONTROL TYPE ONLY

2-5 USING THE BLOWER

Located on the left rear side of the cleaner.1) Disconnect the hose from the body of the cleaner.2) Connect the hose clamper to the blow hole.

3