6 CLEANING THE FILTER 
6-1 CLEANING THE INLET FILTER
①➁➂
6-2 CLEANING THE OUTLET FILTER
①➁➂
7 CHANGE THE BATTERY(Optional)
1) BATTERY TYPE : AA Size
NOTE
When the vacuum cleaner does not operate, replace the batteries.
If the problem persists, please contact our authorized dealer.
1. Never disassemble or recharge the batteries. | 3. Do not reverse | |||
WARNING 2. Never heat up the batteries or throw them into fire. 4. Dispose the batteries properly. | ||||
- IF YOU HAVE A PROBLEM |
|
| ||
|
|
|
|
|
PROBLEM | CAUSE |
| REMEDY 0 |
|
Motor does not start. | No power supply. |
| Check cable, plug and socket. |
|
| Thermal |
| Leave to cool. |
|
|
|
|
|
|
Suction force is gradually | Nozzle, suction hose or tube |
| Check for blockage and |
|
decreasing. | is blocked. |
| remove. |
|
Cord does not rewind fully. | Check that the cord is not |
| Pull the cord out |
|
| twisted or wound unevenly. |
| push down the cord rewind |
|
|
|
| button. |
|
Vacuum cleaner does not | Crack or hole in hose. |
| Check hose and replace if |
|
pick up dirt. |
|
| required. |
|
|
|
|
|
|
Low or decreasing suction | Filter is full with dust. |
| Please check filter and, if |
|
|
|
| required, clean as illustrated |
|
|
|
| in the instructions. |
|
This Vacuum cleaner is approved the following. |
|
| ||
EMC Directive : 89/336/EEC , 92/31/EEC and 93/68/EEC |
|
| ||
Low Voltage Safety Directive : 73/23/EEC and 93/68/EEC |
|
| ||
