![](/images/new-backgrounds/1301089/30108941x1.webp)
Operating the cleaner
INSTALLING THE ROBOTIC VACUUM CLEANER
CHARGING
When the product is initially purchased, the battery
is fully discharged, and you must charge the robotic | Power Lamp | Charging Lamp |
| ||
vacuum cleaner manually. |
|
|
Turn on the Power Switch at the bottom of the product.
1. After aligning the charge pins of the main unit with | Power | Charging Lamp | ||
Lamp | ||||
the charge pin of the charger station, press the main |
| |||
|
| |||
unit until you hear a “Recharging power” sound from |
|
| ||
the charger. |
|
|
| |
- The Charging Lamp turns green. |
|
| ||
2. Check the charge status of the robotic vacuum |
|
| ||
cleaner. |
|
|
| |
- When charging starts, the battery level indicator and |
|
| ||
“ ” will be displayed in sequence in the display panel. |
|
| ||
- When charging is complete, the battery level indicator and | Charging | Fully charged | ||
“FULL” will be displayed in the display panel. | ||||
| ■ When the battery level display fl ashes | <Charge display> | ||
Flash |
|
| ||
while cleaning, the robotic vacuum |
|
| ||
|
|
| ||
| cleaner stops vacuuming and | complete | charging | |
| automatically charges itself at the charger. | |||
|
| Charge | Charging Required |
■When the battery level fl ashes and “LO” is displayed while cleaning,
Flash robotic vacuum cleaner cannot be operated by the buttons on the
main unit. In this case, directly carry the robotic vacuum cleaner
to the charger to charge the battery. (This is when the battery is completely discharged.)
● When the product is initially purchased, it will take about 120 minutes to fully charge the battery and will run for about 90 minutes.
NOTE ● When charging the battery while the battery is
●Measures to take when charging is not smooth.
When the robotic vacuum cleaner cannot be automatically charged, check the following:
-Turn the Power Switch at the bottom of the robotic vacuum cleaner off and on (Reset).
-
-Check whether there are any foreign substances on the charge connector and wipe the charge connector on the main unit and the charger with a dry cloth.
-Check whether there are objects near the charger that are strong refl ectors.
●When separating the robotic vacuum cleaner from the charger, it will discharge naturally.
-Charge the robotic vacuum cleaner through the charger, if possible. (When leaving your home unattended for a long period of time due to a business trip, travelling etc., turn off the Power Switch of the robotic vacuum cleaner and unplug the power of the charger to store them.)
03 OPERATING THE CLEANER
Operating the cleaner _21