WATER SUPPLY CONNECTOR FILTER

 

inlet water

 

 

valve

 

1.Pull out the filter and wash well.

2.Pull in the filter and connect

3. Check if there is a leakage.

 

the hose to the inlet water

Note to tighten up the

 

valve tightly.

connector.

CLEANING THE FILTER NET

Clean the filter net often to keep the washer clean.

 

1. Push the upper part

2. Open the cover as

3. Clean the filter.

4. Close the cover and insert the

of the filter and pull in.

shown in the figure.

 

lower part of the filter in the

 

 

 

basket first and then push the

 

 

 

filter with "click" sound .

 

 

 

 

HOW TO CLEAN THE FILTER

1

. Place a rag under the washer filter not to wet the floor.

 

(pump drained washer)

2

. Rotate the filter counterclockwise

 

 

1.

Place a rag under washer filter not to wet the floor.

 

and pull out the filter.

 

 

2.

Turn the filter-cap to the left.

3

. Remove dirts and rotate

open

close

3.

Take the filter out and

 

the filter clockwise

 

 

4.

remove dirts.

 

until it locks in position.

 

 

Reassemble in

 

 

 

 

 

reverse order.

10