troubleshooting
Check these solutions if your washer…
PROBLEM | SOLUTION |
| ||
|
|
|
| |
will not start. | • | Make sure the lid is closed. |
| |
| • Make sure your washer is plugged in. |
| ||
| • Make sure the water source faucets are open. | |||
| • Make sure to press the Start/Pause button to start your Washer. | |||
| • Make sure Child Lock is not activated. See page 21. | |||
| • | Before your washer starts to fill, it will | make a series of clicking noises | |
|
| to check the lid lock and do a quick drain. | ||
| • Check the fuse or reset the circuit breaker | |||
|
|
|
| |
has no water or not enough | • | Turn both faucets on fully. |
| |
water. | • | Straighten the water inlet hoses. |
| |
| • Disconnect hoses and clean the screens. Hose filter screens may be | |||
|
| clogged. |
| |
|
|
|
| |
has detergent remaining |
|
|
| |
in the automatic dispenser | • | Make sure your washer is running with sufficient water pressure. | ||
after the wash cycle is | ||||
|
|
| ||
complete. |
|
|
| |
|
|
| ||
vibrates or is too noisy. | • | Make sure your washer is set on a level surface. If the surface is not | ||
|
| level, adjust your washer’s feet to level the appliance. | ||
| • Make sure your washer is not touching any other object. | |||
| • Make sure the laundry load is balanced. | |||
|
|
| ||
stops | • | Plug the power cord into a live electrical outlet. | ||
| • Check the fuse or reset the circuit breaker. | |||
| • Close the lid and press the Start/Pause button to start your washer. | |||
|
| For your safety, your washer will not spin unless the lid is closed. | ||
| • | Before your washer starts to fill, it will | make a series of clicking noises | |
|
| to check the lid lock and do a quick drain. | ||
| • There may be a pause or soak period in the cycle. Wait and it may | |||
|
| start. |
| |
| • Check the screens on the inlet hoses at the faucets for obstructions. | |||
|
| Clean the screens periodically. |
| |
|
|
|
| |
05 troubleshooting
English - 31
2015/7/28 10:38:54
