WATER SUPPLY CONNECTOR FILTER

1.Pull out the filter and wash well.

inlet water valve

2.Pull in the filter and connect the hose to the inlet water valve tightly.

3.Check if there is a leakage. Note to tighten up the connector.

CLEANING THE FILTER NET Clean the filter net often to keep the washer clean.

1.Push the upper part of the filter and pull in.

2. Open the cover as

3. Clean the filter.

4. Close the cover and insert the

shown in the figure.

 

lower part of the filter in the

 

 

basket first and then push the

 

 

filter with "click" sound .

1. Push up and

2. Remove the collected

3. Clean the filter.

4. Pull down the filter net.

pull out the filter net.

lint from the filter net.

 

 

 

 

 

 

HOW TO CLEAN THE FILTER

1. Place a rag under the washer filter not to wet the floor.

(pump drained washer)

2. Rotate the filter counterclockwise

1.Place a rag under washer filter not to wet the floor.

and pull out the filter.

2.Turn the filter-cap to the left.

3. Remove dirts and rotate

3.Take the filter out and

the filter clockwise

remove dirts.

until it locks in position.

4. Reassemble in

 

reverse order.

10