WASHING PROCEDURE

Before starting washing, check the following; Connect the water supply hose to the water tap. Leave a tap open. Plug the power cord in. Make sure to lay down the drain hose. (In case no drain pump)

FUZZY(DIGITAL) COURSE

POWER

START/

 

Selects the best washing course

HOLD

 

 

 

automatically.

 

 

1.Press the POWER Button to"ON".

2.Press the START/HOLD button.

Water level is selected automatically. Washing,rinsing, and spinning follow.

If you want to pause, press the START/HOLD

button again.You can change the course when paused.

3. Close the lid.

BLANKET COURSE

POWER COURSE START/

HOLD

1.Press the power button to "ON".

2.Press the course select button once.

3.Press the START/HOLD button

Water level is selected automatically. Washing, rinsing, and spinning follow.

If you want to pause, press the START/HOLD

button again.You can change the course when paused.

4. Close the lid.

SPEEDY COURSE

POWER COURSE START/

HOLD

Because washing is speedy, it is good for light or less stained laundry.

1.Press the power button to "ON".

2.Press the course select button twice.

3.Press the START/HOLD button

Water level is selected automatically. Washing, rinsing, and spinning follow.

If you want to pause, press the START/HOLD

button again.You can change the course when paused.

4. Close the lid.

WOOL COURSE

POWER COURSE START/

HOLD

1.Press the power button to "ON". 2.Press the course select three times. 3.Press the START/HOLD button.

Washing,rinsing, and spinning follow.

If you want to pause, press the START/HOLD

button again.You can change the course when paused. 4. Close the lid.

CAUTION . . .

-Do not use water above 30˚C for WOOL washing. -Refer to the tag attached on the clothes for washing information.

-Fasten buttons and turn inside out before washing. -Use the detergent indicated in the laundry.

-When the degree of dirt is extreme, soak the laundry in warm water for about 10 minutes before pressing the WOOL course button in order to enhance washing efficiency.

Put the laundry into the washer and add detergent, too. Be careful not to overload. Use right detergent

for the fabrics you are washing.

ECO+ COURSE

POWER COURSE START/

HOLD

1.Press the power button to "ON".

2.Press the course select button four times.

3.Press the START/HOLD button

Water level is selected automatically. Washing, rinsing, and spinning follow.

If you want to pause, press the START/HOLD

button again.You can change the course when paused.

4. Close the lid.

DELAY START COURSE

POWER

COURSE

DELAY

START/

START

HOLD

 

 

Select this course when you have to go out or do something else.

1.Press the power button to "ON".

2.Press the DELAY START button once.

You may change the delay start time with

use the DEALY START button. (from 3 hours to 18 hours)

3.Press the START/HOLD button and put

the proper amount of detergent into tub.

4.Close the lid.

The washing finishes by the time you reserved.

AIR TURBO COURSE

POWER AIR START/

TURBO HOLD

1.Press the power button to "ON".

2.Press the AIR TURBO button.

Each time the Air Turbo button is pressed, the operations are performed in the following order:

15min30minOFF15min

3.Press the START/HOLD button

4.Close the lid.

-This can be selected as an additional option for all courses except Wool.

-The Air Turbo function is only available when SPIN or Tub Drying is selected.

-Select this when you want to half-dry the laundry.

5