C
C
3.Hold the adaptor and turn part (C) in the arrow direction to loosen it by 5 mm (*).
4. Insert the adaptor into the water tap, and tighten the screws while lifting up the adaptor.
5. Turn part (C) in the arrow direction to tighten it.
Installation
E
6. While holding down part (E), connect the water hose to the adaptor. Then, release part (E). The hose fits into the adaptor with a clicking sound.
7.If you are using a screw type of water tap, use the provided
English 21
|
| 2018/3/8 14:12:39 | |
|
| ||
|
|
|
|