washing a load of laundry
OVERVIEW OF THE CONTROL PANEL
1 7 2 34 5 6 789 10
1 | Digital graphic | Displays the remaining cycle time, all cycle information, and error messages. | |
display | |||
|
| ||
|
| Press the button repeatedly to cycle through the different water temperature | |
|
| options. | |
|
| Extra Hot/Cold - Heavily soiled, colorfast items. Only available with the | |
|
| Sanitize cycle. | |
2 | Temperature | Hot/Cold - Whites and heavily soiled, colorfast items. | |
| |||
selection button | Warm/Warm - Colorfast items. When warm rinse is selected, only the final | ||
| |||
|
| rinse will be warm. | |
|
| The other rinses will be cold to conserve energy. | |
|
| Warm/Cold - Moderately soiled, colorfast items; most | |
|
| Cold/Cold - Brightly colored, very lightly soiled items. | |
|
| Press the button repeatedly to cycle through the different spin speed options. | |
|
| Extra High - Removes more water from loads during spin. | |
|
| To minimize wrinkling of | |
| Spin selection | the Extra High spin option for these loads, nor overload your Washer. | |
3 | High - Use for underwear, | ||
button | |||
| |||
| Medium - Use for jeans, | ||
|
| ||
|
| Low - Use for delicate items needing a slow spin speed. | |
|
| No Spin - Drains your Washer without spinning. Use for extremely delicate | |
|
| items that cannot tolerate any spin. | |
|
| Press this button to sanitize your laundry in cold water. | |
4 | SilverCare™ | Active silver ions are produced from pure silver plates by the process of | |
electrolysis and released into the wash water effectively sanitizing your wash, | |||
button | |||
| even in cold water, without bleach. The SilverCare™ system sanitizes with | ||
|
| ||
|
| 92% less energy use than traditional heat sanitization. | |
|
| Press the button to select the Soil Level/washing time. | |
5 | Soil Level | Heavy - For heavily soiled loads. | |
| |||
selection button | Normal - For moderately soiled loads. This setting is best for most loads. | ||
|
Light - For lightly soiled loads.
6Signal selection Press the button to increase or decrease the end of cycle signal volume or
buttonturn off the signal.