Quick Start Guide
Samsung
Bluetooth® Headset
Before using your headset
Thank you for purchasing the Samsung Bluetooth Mono Headset WEP210. We hope you will be delighted with its operation.
Take a moment before you get started to familiarize yourself with your new headset.
Check the accessories
MakeMake suresure youyou havehave thethe followingfollowing itemsitems withwith youryour headset:headset:
TravelTravel Adapter,Adapter, User’sUser’s Guide,Guide, EarpieceEarpiece CoverCover
The items supplied with your headset may vary, depending on your country or service provider.
Charge your headset
Charge the headset's battery fully before using the headset for the first time.
1Plug the travel adapter into the jack on the headset.
2 Plug the travel adapter into the electrical |
outlet. |
• Charge the headset until the red light on the |
headset turns to blue. |
• The headset will be fully charged in |
approximately 2 hours and 30 minutes. |
WEP210
Get connected in 4 quick steps
Charge your headset
Put your headset in pairing mode Turn on Bluetooth on your phone and pair with headset
Volume Up button
Earpiece |
Volume Down button
•Bluetooth version: 2.0 (compatible with devices of Bluetooth version 1.1 or higher)
•Supported Bluetooth Profiles:
-Headset Profile
-
3 Remove the travel adapter from the headset. |
• The headset cannot be used while charging. |
• Use only a |
Test and use
Start hereAdapter jack Microphone
Headquarters:
1301 East Lookout Drive Suite 150
Richardson, TX 75082
Internet Address:
http://www.samsungmobileusa.com/ accessories
Customer Care Center:
Guide No.:
11/2006. Rev. 1.0
Put your headset in pairing mode
Before you can use your headset, you must pair it with your phone.
1Ensure that the headset is off (see Turn
headset on/off on the reverse side of this guide).
2Press and hold the
Turn on Bluetooth on your phone and pair with headset
1Set your Bluetooth phone to discover the headset by following your phone's guide.
Typically, the steps involve going to the Settings, Connection, or Bluetooth menu on your phone and then selecting the option to discover Bluetooth devices.
Your phone will find the Samsung WEP210 headset and ask if you want to pair with it. Confirm this by pressing the Yes or OK key.
2Enter a passkey or PIN, 0000 (4 zeros), then press the Yes or OK key.
Test and use
Your phone and headset are now paired and ready to make and receive calls. To confirm they are operating properly, make a call:
1Place the headset over your ear.
See Wear the headset on the reverse side of this guide.
2On your phone, make a call to the number you want.
3If your phone and headset are successfully paired, you will hear ringing on the headset.
After you have successfully paired your phone and headset, you do not need to repeat these initial setup steps each time you use the headset.
Using your WEP210
See Features and Functions Guide on the reverse side of this guide
for information on using your WEP210.