Samsung WW80K44305X/LE, WW70K44305W/LE, WW90K44305W/LE, WW80K44305W/LE manual Information codes

Problem		Action
	• Make sure the door is properly closed.
	• Make sure all hose connections are tight.
Leaks water.	• Make sure the end of the drain hose is correctly inserted and
		secured to the drain system.
	•	Avoid overloading.
	•	Use high efficiency (HE) detergent to prevent	oversudsing.
	• Excessive suds collect in recesses and can cause foul odours.
Has odours.	• Run cleansing cycles to sanitize periodically.
	• Clean the door seal (diaphragm).
	• Dry the washing machine interior after a cycle has finished.
No bubbles are seen	• Overloading may screen bubbles.
(Bubbleshot models
	• Severely contaminated laundry may not generate bubbles.
only).
	•	The Add Door can be opened only when the	indicator
		appears. However, it does not open in the following cases:
Can I open the Add		- When the boiling or drying process is running and the
		internal temperature becomes high.
Door at any time?
		- If you set the Child Lock for safety reasons.
		- When the drum wash or drum drying cycle is running that
		does not involve additional laundry.

If a problem persists, contact a local Samsung service centre.

Information codes

If the washing machine fails to operate, you may see an information code on the screen. Check the table below and try the suggestions.

Code		Action
	Water is not supplied.
	• Make sure the water taps are open.
	• Make sure the water hoses are not clogged.
	• Make sure the water taps are not frozen.
4C	•	Make sure the washing machine is operating with sufficient
		water pressure.
	• Make sure that the cold water tap and the hot water tap are
		properly connected.
	•	Clean the mesh filter as it may be clogged.

Troubleshooting

English  53 

Untitled-5 53

2017-06-02 ￿￿ 10:23:56