Samsung WW80M644OPM/KJ manual Operations, Control panel

Operations

Operations

Control panel

02
			11
08		09	10
			12
07
03	04	05	06

01	Cycle Selector	Turn the dial to select a cycle.
		The display shows current cycle information and estimated time
02	Display	remaining, or an information code when a problem occurs.
		For buttons and icons, refer to the corresponding page.
03	Temp.	Press to change the water temperature for the current cycle.
04	Rinse	Press to change the rinse count for the current cycle. You can set the
		rinse count to a max of 5, depending on the cycle.
		Press to change the spinning speed for the current cycle. The
		revolutions per minute (RPM) differs with the model.
		• Rinse Hold(No indicator): The final rinse process is suspended so
		that the laundry remains in the water. To unload the laundry, run
		a drain or spin process.
		-  To use the Rinse Hold option, press Spin repeatedly until all
05	Spin	rpm numeric indicators turn off. Not available for the DRAIN/
		SPIN cycle.
		• Spin Only: To run the Spin Only cycle, press Spin for 3 seconds.
		When the cycle time and spinning speed appear, press Spin
		repeatedly until a desired spinning speed is selected. Then,
		press and hold Start/Pause (Hold to Start) to start the cycle. The
		spinning time depends on the selected cycle.
06	Options	Press to select the options. Availability of the options depends on
		the cycle.
		Delay End lets you set the end time of the current cycle. Based
		on your settings, the start time of the cycle will be determined
07	Delay End	by the machine’s internal logic. For example, this setting is useful
		for programming your machine to finish a wash at the time you
		normally return home from work.
		• Press to choose a preset unit of hours.

32  English

WW90M644OPW_DC68-03903D-00_EN.indd 32

2018/3/29 15:24:14