Changing the Room Temperature Quickly
The turbo function cooling/heating is used to cool or heat your room as quickly as possible.
Example : You have just come home and find that the room is very hot.
You wish to cool it down as quickly as possible.
The turbo function operates for 30 minutes with the maximum settings before returning automatically to the mode and temperature previously selected.
The turbo function can be controlled by using remote control.
1 If necessary, press the ON/OFF( |
| ) button. |
|
Result: ◆ The power indicator on the control panel comes on.
◆The indoor unit beeps twice.
◆The operation mode previously set is displayed.
◆The air conditioner starts up in the mode selected
when the unit was last used.
IMPORTANTE The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started immediately after being:
◆Switched on
◆Stopped
It will start up normally after a
2Check to see whether the operation mode is positioned at ‘AUTO’, ‘COOL’ or ‘HEAT’; the turbo cooling operation cannot be selected when the unit is in the "FAN" operation mode.
Remote control
3 Press the TURBO button on the remote control.
Note ◆ The tempeature and fan setting are adjusted automatically.
◆The TURBO indicator on the control panel comes on.
◆ The air conditioner cools or heats the room as quickly as possible.
◆ After 30 minutes, the air conditioner is reset automatically to the previous mode, temperature and fan settings.
4If you wish to stop the Turbo function before the end of the
Result: ◆ The air conditioner is reset automatically to the previous mode.
.
5To control the direction of the air flow, refer to page 15.
ENGLISH
