Recording Voice
1 Slide the switch to the ENC position to begin Voice Recording.
2 To stop the recording, move the switch in the opposite direction and a new voice file will be created.
Recording Time
Remaining Time
✍Note
-The files are recorded in the order of V001,V002......,
and saved as WAV file in the VOICE folder after recording.
-If the Memory is full, the Voice Recording is stopped automatically.
-Voice Recording does not work in FM Mode or when the Line In cable is connected.
MP3 Encoding
1 Connect the Audio Output port on the external audio source
(or the Line Out port) to the ENC port on the device with the Line cable.
2 Slide the switch to the ENC position begin MP3 encoding.
●To pause during Encoding, press the √/ ❙❙button. Press the √/ ❙❙button once again to recommence recording.
3 Slide the switch to the REC position while recording to stop the encoding, and a new encoding file will be created.
●Recording will take place in the order of L001, L002, L003….
When the encoding is finished, the files will be saved as MP3 files in the LINE_ENC folder.
✍NNoottee
-Bit Rates can be set within the range of 32Kbps~128Kbps.
-You can adjust the volume during encoding monitoring.
✍NNoottiiccee-Do not disconnect the Line cable during Encoding.
-If the battery is not charged enough, encoding will not be done.
-Adjust the volume of the external audio source to a suitable level and encode it. If the volume level is extremely high, the sound quality may not be good.
24 | 25 |