HowHow toto checkcheck Usbusb driverdriver

3 Plug one end of the USB cable into the USB port on the back of the PC.

4 Connect the opposite end of the USB cable to the USB cable port on the bottom of the yepp.

●If you disconnect the USB cable from your PC while

implementing a command or initializing during USB driver installation, your PC may not function correctly.

● The yepp will automatically turn on.

5	USB driver is installed with a message saying that it	USB

	is searching for a new device. You may not see the
		connect
	display screen during installation.

	Go to the device manager to check that installation	cable
	has been successfully completed.

6 Upon installation of the USB driver "SAMSUNG YP-55”will appear in the [System Properties] ➝ [Device Manager].

	REC / ENC
MODE	VOL

Note :

HowHow toto checkcheck USBUSB driverdriver

Windows 98:

Control Panel ➝ System ➝ Device Manager ➝

Universal Serial Bus controllers/Samsung YP-55 Class

Windows 2000:

Control Panel ➝ System ➝ Hardware ➝

Device Manager ➝ Universal Serial Bus controllers ➝

USB Mass Storage Device Windows XP:

Control Panel ➝ System ➝ Hardware ➝

Device Manager ➝ Universal Serial Bus controllers ➝

USB Mass Storage Device

7 When USB driver is not Installed automatically, refer to next page.

Note :

For WinXP, the following window will appear whenever you connect the USB cable to your yepp.