Recording MP3s
✽To move to other modes from LINE_ENC mode, refer to “Changing Mode”.
1 Connect the Audio Output port on the external audio source
(or the Line Out port) to the ENC port on the device with the Line cable.
2 Press and hold the REC button to start MP3 recording.
●If the 
button is pressed, recording is paused and if the 
button is pressed again, the recording resumes.
Recording MP3s
3 If the REC button is pressed during recording, the recording stops and an MP3 file is created.
●The files are recorded in the order of L001, L002....
and saved as MP3 file in LINE_REC folder after recording.
✍Note
-Bit Rates can be set within the range of 32Kbps~128Kbps.
-Volume can be adjusted while monitoring the recording.
✍Notice
-Do not disconnect the Line cable during recording.
-If the battery is not sufficiently charged, the player will not completely record the file.
-Adjust the volume of the external audio source to a suitable level and record it. If the volume level is too high, the sound quality may be poor.
24 | 25 |
