59
Safety InformationSafety Information
58
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the inter-
ference by one or more of the following mea-
sures:
◆Reorient or relocate the receiving antenna.
◆Increase the separation between the equipment
and receiver.
◆Connect the equipment to an outlet on a circuit
different from that to which the receiver is
connected.
◆Consult the dealer or an experienced radio/TV
technician for help.

FCC

This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Caution:Any changes or modifications in
construction of this device which are not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment
Note:This equipment has been tested and
found to comply with the limits for a Class B digi-
tal device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reason able
protection against harmful interference in a
residential installation This equipment generates,
uses and can radiate radio frquency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications, However, there is no
guarantee that interference will not occur in a
particular installation.

FCC

Any changes or modifications not expressly
approved by the grantee of this device could
void the user’s authority to operate the device.

Compliance

This product conforms to the following
Council Directive:
◆Directive 89/336/EEC, 92/31/EEC(EMC)

Declaration of Conformity

Name: Samsung Electronics Co., Ltd
Address: 416, Maetan-3Dong, Paldal-Gu,
Suwon City, Kyungki-Do, Korea 442-742
declares under its sole responsibility that the
product
Trade Name: Samsung Electronics Co., Ltd
Model Number: YP-MT6
has been tested according to the
FCC/CISPR22/95 requirements for Class B
devices and found compliant with the following
standards
EMI/EMC: AnSI C63.4 1992, FCC Part 15
Subpart B
This device complies with part 15 of the FCC
Rules.
Operation is subject to the following two
conditions:
1.This device may not cause harmful
interference, and
2.This device must accept any interference
received, including interference that may
cause undesirable operation.
Party Responsible for Product Compliance
Samsung Electronics America
QALab.
3351 Michelson Dr. Suite #290
Irvine, CA92612