YP-T5 Quick Guide

Location of Controls

 

 

Neck strap Hook

Display

 

MENU, Navigation button/

 

 

Move to Track/Speed Search/

 

 

Volume Button

Loop Repeating Button

 

 

Play/Pause Button

Recording Button

 

Hold Switch

Microphone

 

 

ENC Jack

Earphone Jack

 

USB Cable

 

 

Connection Port

 

 

 

Battery Cover

 

Turning Power On and Off

 

Playing Music
Power On : Press the button to turn on the power.
Press the button.

Power Off : Press and hold the button to turn off the power. Playback starts.

Pausing Music

Press the button to pause playback.

If no buttons are pressed within 10 seconds(changes depending on settings), the yepp automatically powers off.

While in Pause mode, briefly press again to resume playback.

Connecting the USB cable

Before connecting the yepp to PC, make sure to install USB driver.

1

Connect a USB cable to the USB port on the

 

computer.

 

 

 

 

 

Connect the other end of a USB cable to the USB
2 cable connection port on the bottom of the yepp,

 

and press the

 

 

 

button on the main unit.

 

 

 

 

 

 

 

If you disconnect the USB cable from your PC while

implementing a command or initializing during USB driver installation, your PC may not function correctly.

 

USB driver is installed with a message saying that

USB

 

 

 

 

 

 

 

 

 

 

3 it is searching for a new device. You may not see

connect

 

 

 

 

 

 

 

 

 

 

the display screen during installation.

cable

 

 

 

 

 

 

 

 

Go to the device manager to check that

 

 

 

 

 

installation has been successfully completed.

 

 

 

 

4

Upon installation of the USB driver

 

 

 

 

 

 

 

 

"SAMSUNG YP-T5" will appear in the

 

 

 

 

[Start] → [Settings] → [Control Panel] →
[System Properties] → [Device Manager].

1

2