Recording
Voice
To Record Voice
1 Press the REC button to start voice recoding.
2 If the REC button is pressed again, the recording stops and a voice file is created.
Note
●Recording is performed in order (V001, V002, etc.) and files are saved in the WAV format after recording.
●If the Memory is full, the Voice Recording is stopped automatically.
●Voice Recording does not work in FM Mode or when the Line In cable is connected.
28
1
2
3
MP3
Encoding
Connect the Audio Output port on the external audio source
(or the Line Out port) to the ENC port on the device with the Line cable.
Press the REC button to start MP3 encoding.
●If the 
button is pressed, encoding is paused and if the 
button is pressed again, the encoding resumes.
If the REC button is pressed during encoding, the encoding stops and an encoding file is created.
●Encoding is performed in order (L001, L002, etc.) and files are saved in the MP3 format after encoding.
Note
●Bit Rates can be set within the range of 32Kbps~128Kbps.
●Volume can be adjusted from level 0 to 10 while monitoring the Encoding.
Notice
●Do not disconnect the Line cable during Encoding.
●If the battery is not charged enough, encoding will not be done.
●Adjust the volume of the external audio source to a suitable level and encode it. If the volume level is extremely high, the sound quality may not be good.
English
29
