Searching for Music/Voice FilesRecording MP3s
✽To move to other modes from the LINE_REC mode,
refer to page 47 "Changing Mode"
- Bit Rates can be set within the range of 32Kbps~192Kbps.
- Beeps are disabled while recording.
- Recording is allowed only when there are 1MB or more of free memory .
NN
NNoo
oott
ttee
ee
- VBR(Variable Bit Rate) file: A file that constantly changes the compression rate according
to the type of sounds, such as their pitch, in the file.
- When playing a VBR file, you cannot move to and play the previous track even if you push
the “M”button to the position within 3 seconds after playback starts.
- Files that were downloaded in MP2 or MP1 and had their file extension changed to MP3 may not play.
NN
NNoo
oott
ttee
ee
- Do not disconnect the Line cable during Recording.
- If the battery is not sufficiently charged, the player will not completely encode the file.
- Adjust the volume of the external audio source to a suitable level and recode it.
If the volume level is too high, the sound quality may be poor.
NN
NNoo
oott
ttii
iicc
ccee
ee
43
42
1Connect the Audio Output port
on the external audio source
(or the Line Out port) to the
ENC port on the device with
the Line cable.
●
Press the play button on the external
device to play the music to record.
2Press and hold the REC button to start MP3 recording.
●
If the button is pressed, recording is paused and if the button is pressed again,
the recording resumes.
3If the REC button is pressed during recording, the recording stops and an
MP3 file is created.
●
The files are recoded in the order of L001, L002....
and saved as MP3 file in LINE_REC folder after recording.
ENG
● Push and hold the “M” button left or right during playback to search for
the a specific section of the music file you want to listen to.
● Release the “M” button to resume play normally.
To search for specific parts during play
● Push the “M” button to the position briefly during playback to play the next track.
● Push the “M” button to the position briefly within 3 seconds after playback starts,
to move to and play the previous track. Push the “M” button to the position
briefly after 3 seconds to play the current track from the beginning.
To change tracks during play
● Push the “M” button left or right in stop/pause mode to move
to the previous/next track.