SanDisk uSSD 5000 manual Specifications

Specifications

High Performance*

SLC flash

•Sustained Read 31.6 MB/sec

•Sustained Write 24.8 MB/sec MLC flash

•Sustained Read 29.9 MB/sec

•Sustained Write 12.8 MB/sec

Form Factors

•2x5 header, x86 internal USB standard

•Configurations: Standard, low profile

Electrical Specifications

•DC supply voltage: 5V (±10%)

•Active mode: 150 mA (typ)

Compatibility and Certifications

High Reliability

•Unlimited Read cycles

•Dynamic and static wear-leveling

•Dynamic bad block management

•Advanced EDC/ECC

•Up to 4M mean time to failure (MTTF)** hours

Wide Capacity Range

•SLC flash: 1GB to 8GB

•MLC flash: 2GB to 8GB

Limited Warranty

• 3 years

USA

Tel: +1-408-470-4440

Fax: +1-408-470-4470 OEMinfo@sandisk.com

Japan

Tel: +81-3-5423-8101

•USB 2.0 interface, certified by the USB organization

•Complies with Microsoft Vista ReadyBoost requirements

•RoHS & Chinese RoHS Compliance

Wide OS Support

•Microsoft XP Embedded, Microsoft Windows for Point of Service, Microsoft Win.CE, Microsoft XP Pro, Microsoft Windows Server 2003, Microsoft Windows Vista (ReadyBoost & Storage), and Linux

Environmental Specifications

•Operating temperature: 0°C to +70°C

•Storage temperature: -55°C to +95°C

•Operating altitude: up to 80,000 feet

•Operating shock: 50g, 11msec, half sine

•Non-operating shock: 1,500G, 0.5msec, half sine

•Operating vibration: 2.17gRMS (20Hz to 2000Hz)

•Non-operating vibration: 3.08gRMS (20Hz to 2000Hz)

Mechanical Specifications

•Standard: 26.65mm X 37.80mm X 10.60mm

•Low profile: 26.65mm X 37.80mm X 6.88mm

*1 gigabyte (GB) = 1 billion bytes; 1 megabyte (MB) = 1 million bytes; speeds based on internal testing; performance may be lower depending on host device. Some of the listed capacity is used for formatting and other functions, and thus is not available for data

storage.

**Based on internal testing. The MTTF calculation does not take into account the disk endurance limitation. For the disk endurance, please refer to the endurance section in the product specification.

SanDisk and the SanDisk logo are trademarks of SanDisk Corporation, registered in the United States and other countries. uSSD is a trademark of SanDisk Corporation. Other brand names mentioned herein are for identification purposes only and may be trademarks of their respective holder(s).

©2007 SanDisk Corporation. All rights reserved. 8/07 80-11-01469

Fax: +81-3-5423-8102 OEMJapan@sandisk.com

Taiwan

Tel: +886-2-2515-2522

Fax: +886-2-2515-2295 OEMAsia@sandisk.com

China

Tel: :+86-755-8348-5218

Fax: +86-755-8348-5418 OEMChina@sandisk.com

Korea

Tel: :+82-2-3452-9079

Fax: +82-2-3452-9145

Europe

Tel: +33-(1)-43-37-2131

Fax: +33-(1)-43-37-2111 OEMEurope@sandisk.com

Rest of the World & Israel

Tel: +972-9-764-5000

Fax: +972-3-548-8666

For more information, please visit www.sandisk.com/uSSD