removed form the display.
Light
Pressing the light button located on the top of the radio will turn on the light and illuminate the display for approximately 7 seconds.
MW step switch
1.This switch located on the bottom side of the radio provides a means of changing the MW step from 9kHz to 10 kHz. In Europe and most other parts of the world, set the switch to the 9 kHz position. For the USA and Canada, set the switch to the 10kHz position.
Troubleshooting /RESET button
If the radio fails to operate correctly, or some digits on the display are missing or incomplete, carry out the following procedure.
1.Switch off the radio and remove the batteries.
2.With the aid of a suitable implement (the end of a paper clip or pen), press the RESET button located in the battery compartment for at least 5 seconds, this will reset the microprocessor, clock time and clear all stations stored in the preset memory.
Care and maintenance
Do not allow this radio to be exposed to water, steam or sand ,Do not leave the radio where excessive heat could cause damage such as in a parked car where the heat from the sun can build up even though the outside temperature may no Seem too high.
Specifications
Frequency range
FM |
| 87.5 | - | 108 | Mhz |
MW | 522 | - | 1710 | kHz | |
SW | 120m | 2.3 | - | 2.495 | MHz |
| 90m | 3.2 | - | 3.4 | Mhz |
| 75m | 3.85 | - | 4.0 | MHz |
| 60m | 4.75 | - | 5.06 | MHz |
| 49m | 5.9 | - | 6.2 | MHz |
| 41m | 7.1 | - | 7.35 | MHz |
| 31m | 9.4 | - | 9.99 | MHz |
| 25m | 11.6 | - | 12.10 | MHz |
| 21m | 13.57 | - | 13.87 | MHz |
| 19m | 15.1 | - | 15.8 | MHz |
| 16m | 17.48 | - | 17.9 | MHz |
| 15m | 18.9 | - | 19.02 | MHz |
| 13m | 21.45 | - | 21.75 | MHz |
| 11m | 25.6 | - | 26.1 | MHz |
Specification content
Power requirement | 6V |
Batteries | 4 X IEC size Lr6 (AA) |
Battery life | |
| a day at normal volume using alkaline batteries. |
9
