Sangean Electronics DCR-200 manual Setting the alarm clock

Setting the alarm clock

GB

Your DCR-200 digital receiver has two alarms which can each be set to wake you to DAB, FM radio, voice message or buzzer alarm.

The alarms may be set while the unit is in standby mode or

while playing. The alarm clock setting will not function when the display appears NO CLOCK.

1. Before setting an alarm ensure that the clock time is set. Press and hold the Alarm button. “Alarm 1” will show on the display.

2. Rotate the Tuning control to select the required alarm, 1 or 2. Press and release the Tuning control to enter the alarm setting.

3. Rotate the Tuning control to choose whether to set the alarm to On or Off. If you decide to abort alarm setting, choose Back and press the Tuning control.

2-7

4.Press and release the Tuning control. If the previous selection was to switch on the alarm, then alarm time setting will show on the display

and the Alarm hour digits will flash. If Off was selected, the unit will exit the alarm menu.

5. Rotate the Tuning control to choose the alarm hour and then press and release the Tuning control to enter the hour setting. The alarm minute digits will then flash on the display.

6.Rotate the Tuning control to choose the alarm minute and then press and release the Tuning control to enter the minute setting.

26