Sanitaire 6000 warranty How To Remove Polisher From Shipping Crate

HOW TO REMOVE POLISHER FROM SHIPPING CRATE

1.Lift up on handle to release lock.

4.Lift upper handle and place end-to-end against lower handle, lining up the holes for the bolts. Slide handle sleeve downward until all holes are lined up.

2.Move upper handle forward to expose wing nuts and angle bracket.

5.Use a screwdriver to line up holes and guide bolts through the handle.

3.Remove the wing nuts and bolts from both upper and lower handle. Discard the angle bracket.

6.Handle sleeve and bolts will look like this when they are properly installed.

7.Attach lock nuts on bolts and fasten tightly.

8.Remove wing nuts and washers to unfasten wood shipping retainer. Discard wood shipping retainer.

9.Secure the handle release lock. Tip the side of the carton where the wheels are located on its side and roll the machine out of the carton.

4