ASSEMBLY
•You will find the drain outlet diverter, a black plastic 45- degree elbow, inside the machine. Place this elbow on the drain valve on the front of the unit. The elbow will direct the flow of recovered water downward.
HOW TO USE
Fill Solution Tank
CAUTION: Use only commercially available carpet and upholstery cleaners intended for machine applications.
Remove solution tank lid and fill with mixture of water and extraction detergent. (Follow recommended mix ratio on extraction detergent label.)
NOTE: Do not overfill.
Attach Vacuum Hose Coupling
•Push the hose coupling into the hose inlet.
•Give a slight twist to secure.
Attach Solution Hose Fitting
•Make sure the quick disconnects snap together firmly. As you do this, always inspect hoses for cracks, fraying or leaks. Do not use if hoses are damaged.
Connect Power Cord
CAUTION: To reduce the risk of electric shock, do not lay cord on any wet surfaces.
•Attach power cord to extension cord provided.
•Plug extension cord into outlet.
Power Switches
The power switches are located on the top of the unit.
•Wear ear protection (not provided) if operating the cleaner for a prolonged period of time.
•Push vacuum switch to turn on.
•Push pump switch to turn on.
Prime Pump
•Take the cleaning nozzle and hold it over a bucket or drain. Pull the solution trigger so that the valve is now open and fluid can start flowing through the machine and hoses. You will notice air coming out first. This is normal. Keep the line open until there is no more air, and solution is flowing steadily.
Begin Cleaning
•Turn on the vacuum switch and the pump switch. With the cleaning nozzle and hose in hand you may begin cleaning. By pulling the solution trigger, you will dispense the solution onto the desired area. Because the vacuum is on, the fluid will quickly be sucked back into the cleaning nozzle. You will notice that the area you have just cleaned will be damp. This is normal.
Tips:
If used to clean up spills or messes, clean up as much of the spill or mess using paper towels before final cleaning with the cleaner. If used on fine fabrics or upholstery, test for color fastness in an inconspicuous place before cleaning.
Automatic
NOTE: Always use the wet vacuum cleaner in the upright position. If cleaner tips over, the suction automatically shuts off.
If the cleaner tips over:
•Turn off both switches and set the cleaner upright.
•Wait a few seconds for the motor to come to a complete stop.
•Restart the motor.
When the tank is full:
•As the tank fills with liquid, the ball float (inside the cage) rises until it seats itself against the motor inlet.
•The motor sound becomes a high pitch sound.
•The
•Turn off the power switch.
•Empty the tank (instructions follow).
Empty Tank
CAUTION: Turn off the power switch and unplug electrical cord to service.
•Lift the hose and drain any liquid back into the tank.
•Empty contents into a suitable drain by pulling on the "T" handle above the drain port. (See page 3.)
•Use special care when emptying full tanks with liquids. Pulling the "T" handle completely open can result in a sudden rush of liquid.
•Close "T" handle valve to continue cleaning.
Clean and Store
NOTE: Turn off both switches and unplug electrical cord before cleaning tank.
•Empty tank of all liquid and thoroughly rinse inside before storing.
•Clean and dry tank and all accessories.
•Store indoors in a cool, dry area.
4
