Sanofi-aventis Lantus SoloSTAR manual Lantus Solostar, Your PEN, Step, Attach, Needle

HOW

TO USE

LANTUS® SOLOSTAR®

Follow these straightforward steps every time you use the Lantus® SoloStar® pen.

CHECK

YOUR PEN.

1.Take off the pen cap.

2.Look at the insulin in the reservoir. Lantus® is clear, so don’t use the Lantus® SoloStar® pen if the insulin is cloudy, colored, or has particles in it.

5

STEP 1

ATTACH

THE NEEDLE

1.Wipe the rubber seal on the pen body with an alcohol swab.

2.Remove the protective seal from a new needle. The Lantus® SoloStar® pen works with Becton Dickinson (BD) Ultra-Fine™ needles. Use a sterile new needle for each injection to prevent contamination and blocked needles.

3.Line up the needle with the pen. Keep the needle straight as you screw it on. Make sure the needle is firmly attached.

4.Take extra care: If you don’t keep the needle straight while you attach it, it can damage the rubber seal and cause leaks, or break the needle.

Please click here or visit:
http://products.sanofi-aventis.us/lantus/lantus.html
for Additional Important Information.	6