Sansui SLED2282 owner manual Remote control, CH Channel, Battery Precautions

Remote control
1	12	6.CURSOR ▲/▼/◀/▶ Buttons - Used to operate the
	13	menu functions of the TV.
2		7.ENTER Button - Use to enter or select
		information for On-Screen operations.
3		8.MUTE Button - To turn off the sound, press this
		button once. The TV will be silenced and the
4	14	symbol “Mute” will appear on the screen. The
		muting feature can be released by pressing the
5	15	MUTE button again or one of the VOL (VOLUME)
		+ or – buttons.
6		9.VOL (VOLUME) + / – Buttons - Press the +
		button to increase, or the – button to decrease the
7	16	sound level.
8		10.INPUT SELECT Button - Use to change the
		external input.
9	17	11.CCD Button - Used to display the Closed Caption
		menu screen.
10		12.SLEEP Button - To set the TV to turn off after a
11		preset amount of time, use the SLEEP button on
1.	(POWER) Button - Used to turn the power	the remote control.
		13.PICTURE SIZE Button - Used to change the
on/off to the TV.		picture size.
2.DISPLAY Button - When you press this button,		14.RECALL Button - This button allows you to go
the current information will be displayed on a		back to the previous channel selected by just
screen. To remove the display from the screen,		pressing the RECALL button. Press this button
press this button again.		again to return to the channel you were watching.
3.Direct Channel Selection Buttons (0-9) - Allows		15.EXIT Button - Press to remove setup menu.
direct access to any channel of the TV.		16.AUDIO Button - Change sound track language.
4.– Button -This button is used when selecting
		17.CH (CHANNEL)	/	Buttons - To change the
digital channels.
5.MENU Button - Use to display the On-Screen		channels of the TV.
menu function.

Before using the remote control, batteries must first be installed.

HOW TO INSTALL BATTERIES

1. Open the battery compartment cover.

Use two “AAA” size batteries. The batteries may last approximately one year depending on how much the remote control is used. For best performance, it is recommended that batteries should be replaced on a yearly basis, or when the remote operation becomes erratic. Do not mix old and new batteries or different types.

2.Install two “AAA” batteries (supplied).

3.Replace the battery compartment cover.

BATTERY PRECAUTIONS

These precautions should be followed when using batteries in this device:

• Use only the size and type of batteries specified.

• Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.

• Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.

• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

• Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)

10