Remote control
1 | 12 |
13 | |
2 |
|
3 |
|
4 | 14 |
5 | 15 |
6 |
|
7 | 16 |
8 | |
9 | 17 |
10 |
|
11 |
|
1.(POWER) Button - Used to turn the power on/off to the unit.
2.DISPLAY Button - When you press this button, the current information will be displayed on a screen. To remove the display from the screen, press this button again.
3.Direct Channel Selection Buttons
4.– Button
5.MENU Button - Use to display the
6.CURSOR ▲/▼/◀/▶ Buttons - Used to operate the menu functions of the unit.
7.ENTER Button - Use to enter or select information for
8.MUTE Button - To turn off the sound, press this button once. The unit will be silenced and the symbol “Mute” will appear on the screen. The muting feature can be released by pressing the MUTE button again or one of the VOL (VOLUME) + or – buttons.
9.VOL (VOLUME) + / – Buttons - Press the + button to increase, or the – button to decrease the sound level.
10.INPUT SELECT Button - Use to change the external input.
11.CCD Button - Used to display the Closed Caption menu screen.
12.SLEEP Button - To set the unit to turn off after a preset amount of time, use the SLEEP button on the remote control.
13.PICTURE SIZE Button - Used to change the picture size.
14.RECALL Button - This button allows you to go back to the previous channel selected by just pressing the RECALL button. Press this button again to return to the channel you were watching.
15.EXIT Button - Press to remove setup menu.
16.AUDIO Button - Change sound track language.
17.CH (CHANNEL) | / Buttons - To change the |
channels of the unit. | |
Before using the remote control, batteries must first be installed.
HOW TO INSTALL BATTERIES
1. Open the battery compartment cover.
Use two “AAA” size batteries. The batteries may last approximately one year depending on how much the remote control is used. For best performance, it is recommended that batteries should be replaced on a yearly basis, or when the remote operation becomes erratic. Do not mix old and new batteries or different types.
2.Install two “AAA” batteries (supplied).
3.Replace the battery compartment cover.
BATTERY PRECAUTIONS
These precautions should be followed when using batteries in this device:
• Use only the size and type of batteries specified.
• Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.
• Do not mix different types of batteries together (e.g. Alkaline and
• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
• Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)
10
