Sanus Systems JFBD1 manual Attach Backboard Joining Plates to Bottom Backboard

Step 1: Attach Backboard Joining Plates to Bottom Backboard

NOTE

Do not fully tighten the ¼-20 x 0.5″ Screws (E) until assembly is complete.

Attach the four Backboard Joining Plates (C) to the Bottom Backboard (B) with eight ¼-20 x 0.5″ Screws (E) and eight ¼″ Lock Washers (F). See Figure 1.

Figure 1

Bottom Backboard (B)

Backboard Joining

Plate (C)

Lock Washer

(F)

Screw (E)

Step 2: Attach Bottom Backboard to JFV65 Lowboy

CAUTION

The Bottom Backboard (B) is heavy. To avoid injury or product damage, two people must lift the Backboard.

Position the Bottom Backboard (B) on the JFV65 as shown in Figure 2. The pre-drilled holes on the long edge of the Backboard should face up.

Figure 2

Bottom Backboard (B).

Pre-drilled holes on this edge

Backboard Joining

Plate (C)

NOTE

If these threaded inserts are not present on your furniture, contact Sanus Customer Service for a JFRU Update Kit.