WMS2
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
Thank you for choosing the Sanus WMS2 speaker mount. The Sanus WMS2 speaker mount is designed to support a speaker sized up to 30 cm (12 in.) deep and weighing up to 6.5 kg (15 lbs).
CauTION
Do not use this product for any purpose not explicitly specified by Sanus Systems. Improper assembly may cause property damage or personal injury. If you do not understand these directions, or have doubts about the safety of the assembly, contact Customer Service or call a qualified contractor. Sanus Systems is not responsible for damage or injury caused by incorrect assembly or use.
CauTION
This product is designed for use in wood stud walls only! The wall must be capable of supporting up to five times the weight of the speaker and mount combined. If you have any doubts about the ability of the wall to support the speaker, contact Sanus Customer Service, or a qualified contractor.
WARNING
This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children!
| OPT | Hardware and procedures for multiple mounting configurations are included. When you see this symbol, |
|
| choose the correct configuration to suit your needs. Not all hardware included will be used. |
| |
|
|
|
|
|
|
|
|
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 USA
Customer Service: 1-800-359-5520 • 651-484-7988
info@sanus.com • www.sanus.com ©2008 Milestone AV Technologies
