protection, permanent lubrication & multi-speed capability. Unit(s) shall contain a Printed Circuit Board (PCB) with a control circuit fuse & microprocessor, factory wired & mounted, that receives
&processes all commands & transmissions from the system Infrared Remote Controller. Indoor unit(s) shall also contain an Operation Switch with visible lamps for operation, standby & timer functions, as well as, a system test switch & a manual ON/OFF switch. Unit(s) shall contain a room sensor thermistor, a liquid line strainer, a coil freeze safety thermistor to prevent freeze-up, a factory installed condensate drain pan, drain hose & fitting, and refrigeration line connections with flare nuts. Unit(s) shall contain knockouts on both sides & the top of the casing that allow refrigerant lines to be brought to the unit from multiple directions. Fresh Air knockouts shall be provided on the back and top of the unit(s), to allow system(s) to utilize fresh, outside air up to a maximum of 20% of the rated CFM of the system. A motorized louver/flap, controlled by the infrared remote controller, shall provide automatic, full oscillating supply airflow, as well as being capable of being placed in a set, stationary position. Unit(s) shall be furnished with 2,500 hour, long-life anti-mold, poly type washable air filters that can be easily removed without removing indoor unit casing. Indoor unit(s) shall be powered by voltage from the matching outdoor unit(s).
4)AVAILABLE SANYO ACCESSORIES – All Suspended Ceiling Mount Models
Insulated Copper Line Sets, , Outdoor Unit Wall Mounting
Bracket, Condensate Pumps, Hard Wired Remote Controller (straight cooling systems only).
