Inserting Batteries in the

Remote Control Handset

Remove the battery cover located on the back of the handset by gently pulling backwards from the indicated part.

Insert two AAA/R3 or equivalent type batteries inside. Place the batteries in the right directions and replace the battery cover.

++ -

Note: Remove the battery from remote control handset when it is not to be used for a long period. Otherwise it can be damaged due to any leakage of batteries.

Operating Range for the

Remote Control

Point the top of the remote control toward the LCD TV’s remote sensor LED while pressing a button.

30° 30°

SCREEN LANG SUBTTL PIP

EPG FAV PRESETS SLEEP

1 2 3 4 5 6 7 8 9

 

0

V-

V+

P-

P+

SOURCE

OK

RETURN MENU INFO/?

Remote range is approximately 7m/23ft.

English

Switching the TV On/Off

To Switch the TV On

Connect the power cord to the 220-240V AC,50 Hz.

Switch the “” button to position “” so the TV will switch to standby mode. Then the standby LED lights up.

To switch on the TV from standby mode either:

Press the “” button, P/CH+ / P/CH- or a numeric button on the remote control.

Press the -P/CH or P/CH+ button on the TV.

The TV will then switch on.

Note: If you switch on your TV via standby button on the remote control, the programme/source that you were watching last will be reselected.

By either method the TV will switch on.

To Switch the TV Off

Switch the “” button to position 2 as illustrated,() so the TV will switch off.

To power down the TV completely, unplug the power cord from the mains socket.

Note: When the TV is switched to standby mode, standby LED can blink to indicate that features such as Standby Search, Over Air Download or Timer is active.

- 19 -

Page 20
Image 20
Sanyo ce32ld08-b Inserting Batteries Remote Control Handset, Operating Range for Remote Control, Switching the TV On/Off