Parental Control
To prohibit viewing of certain programmes, channels and menus can be locked by using the parental control system.
This function enables or disables the menu protection system and allows the PIN code to be changed.
Press MENU button and select the Settings by using “
” or “
” button. Press OK button to view Settings menu. Use “
” or “
” button to highlight Parental and press OK to continue:
To display parental lock menu options, PIN number should be entered. Factory default PIN number is 0000. After coding the correct PIN number, parental settings menu will be displayed:
Parental Settings Menu Operation (*)
•Select an item by using “
” or “
” button.
•Use “
” or “
” button to set an item.
•Press OK button to view more options.
(*)If you set Country option as UK in the first time installation, Maturity Lock and Child Lock options will not be visible. This setting is available only for EU countries.
Menu Lock: Menu lock setting enables or disables the menu access. You can disable access to the installation menu or the whole menu system.
Maturity Lock: When set, this option gets the maturity information from the broadcast and if this maturity level is disabled, disables access to the broadcast.
Child Lock: When Child Lock is set, the TV can only be controlled by the remote control. In this case the control panel buttons will not work, except for the Standby/On button. When Child Lock is activated you are able to switch the TV into Standby mode with the Standby/On button. To switch the TV on again, you need the remote control. Hence, if one of those buttons is pressed, Child Lock Is On will be displayed on the screen when the menu screen is not visible.
English
Set PIN: Defines a new PIN number. Use numeric buttons to enter a new pin number. You will need to code your new pin a second time for verification purposes.
IMPORTANT: The factory default pin number is 0000, if you change the pin number make sure you write it down and keep it safe.
Timers
To view Timers menu, press MENU button and select Settings icon by using “
” or “
” button. Press OK button to view Settings menu. Use “
” or “
” button to highlight Timers and press OK to continue:
Setting Sleep Timer
This setting is used for setting the TV to turn off after a certain time.
•Highlight Sleep Timer by using “
” or “
” button.
•Use “
” or “
” button to set. The timer can be programmed between Off and 2.00 hours (120 minutes) in steps of 30 minutes.
Setting Programme Timers
You can set programme timers for a particular programme using this feature.
Press “
” button to set timers on an event. Programme timer function buttons will be displayed on the screen.
Adding a Timer
•Press YELLOW button on the remote control to add a timer. The following menu appears on the screen:
Channel: Changes channel by using “
” or “
”.
Timer Type: This feature is unavailable to be set.
Date: Enter a date using the numeric buttons.
Start: Enter a starting time using the numeric buttons.
End: Enter an ending time using the numeric buttons.
Duration: Displays duration between the starting and ending time.
Mode: Sets a timer to be repeated as Once, Daily or Weekly. Use “
” or “
” buttons to select an option.
•Press GREEN button to save the timer. Press RED button to cancel.
Change/Delete:Controls parental settings on timers.
Editing a Timer
•Select the timer you want to edit by pressing “
” or “
” button.
•Press GREEN button. Edit Timer menu screen will be displayed.
•When finished with editing, press GREEN button to save. You can press MENU button to cancel.
-24 -
