Inserting batteries
Note:
Always remove battery if the remote control is not to be used for a month or more. Battery within the unit may leak and cause damage.
Remote control range
The buttons on the remote control perform similar functions to similarly marked buttons on the front panel.
1. | 2. | Remote sensor |
|
|
Within approx. 7 meters
Two R03/AAA batteries (not supplied)
ADJUSTING THE CLOCK
When the unit is first connected to the AC power line, the display blinks “00:00” dimly.
Example: To set “6:30”.
First, press the z/ON button to turn the power on.
1.Press the PROGRAM/CLOCK button for at least 2 seconds.
2.Press the PROGRAM/CLOCK button again. After “SET CLOCK” appears on the display, the time system appears. Press the f or e button to select “24HR”.
3.Press the PROGRAM/CLOCK button. The hours display blinks.
4.Press the f or e button to set the “hours”.
5.Press the PROGRAM/CLOCK button. The minutes display blinks.
6.Press the f or e button to set the “minutes”.
7.Press the PROGRAM/CLOCK button to complete the setting, the original function returns.
-The time can be set accurately by pressing the PROGRAM/ CLOCK button when a time signal is heard.
-To display the clock during operations, press the PROGRAM/ CLOCK button at least 2 seconds. After a few seconds, the original display returns.
-If a power failure occurs or the mains lead is disconnected, the clock display blinks. Reset the time again.
4
1465AUEnglish.indd | 4 | 10:00:18 |
|
|
| |
|
|
| ||||
|
|
| ||||
|
|
|
|
|
|
|
