Sanyo dc-ht210w -23-

-23-

NOTE:

In tuner mode, [VOLUME+/-], [CH-LEVEL], [MUTE], [TONE] and [S.EFFECT]

buttons are available. For details, please refer to the remote control introduction in

this chapter.

For better FM reception,change the position of FM antenna wire.

For better AM reception,adjust the position of AM external aerial loop.

Press to switch between AM mode and FM mode.

AM/FM

Press to switch between Mono and Stereo

in FM mode.

reception of the broadcast

signal

MO/ST

After tuning in a new frequency, press [MEMORY], then select a preferred

station by inputting the corresponding numbers to save it as a preset station.

MEMORY

AUTO

The digit keys can be used to select a preset station.

For example, press[0] and [2] to select channel 2; press [1] and [5] to select

channel 15.

Press to do auto scanning for the broadcasting radio channels.The unit

can store 40 stations for the AM broadcasting and 40 stations for the FM

broadcasting .

SEARCH+/-

Press to fine tune the frequency of the current station.

During auto scanning, press to stop the process.

RADIO+/-

Press skip to the next/previous preset station.

The following buttons are used in tuner mode. Press [FUNCTION] to select tuner

mode.

5566

8899

10+10+

0/100/10

2233

7799

Basic Playback