Sanyo DP32642 important safety instructions Usb, Video INPUT2, Video INPUT1

class

TRADEMARKS ________

Manufactured under license from Dolby Laboratories. “Dolby” is a trademark of Dolby Laboratories.

CAUTION	RISK OF ELECTRIC SHOCK DO NOT OPEN!	THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK
		OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
CAUTION: TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO		THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTE-
USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.		NANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS UNIT.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFETY INSTRUCTIONS

(31.5” diagonal)

Model No.:

DP32642

Owner’s

Manual

(English)

HDTV LCD

Part No.: 1JC0P1P0001 - -

© 2012 Sanyo Manufacturing Corporation

HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or regis- tered trademarks of HDMI Licensing LLC in the United States and other countries.

As an Energy Star® Partner,

Sanyo Manufacturing Corporation has determined that this product

meets the Energy Star® guide- ENERGY STAR lines for energy efficiency.

Manufactured under license from Audyssey Laboratories. U.S. and foreign patents pending. Audyssey Dynamic Volume® is a registered trademark of Audyssey Laboratories.

SPECIFICATIONS

Power Requirement:

Source: AC 120V, 60Hz

AC Power Consumption: 95 watts

1.	Read these instructions.
2.	Keep these instructions.
3.	Heed all warnings.
4.	Follow all instructions.
5.	Do not use this apparatus near water.
6.	Clean only with dry cloth.
7.	Do not block any ventilation openings. Install in accordance
	with the manufacturer’s instructions.
8.	Do not install near any heat sources such as radiators, heat
	registers, stoves, or other apparatus (including amplifiers) that
	produce heat.
9.	Do not defeat the safety purpose of the polarized or grounding-
	type plug. A polarized plug has two blades with one wider than
	the other. A grounding-type plug has two blades and a third
	grounding prong. The wide blade or the third prong are provided
	for your safety. If the provided plug does not fit fully into your out-
	let, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched par-
	ticularly at plugs, convenience receptacles, and the point
	where they exit from the apparatus.
11. Only use attachments/accessories specified by the
	manufacturer.

15.If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges. In the U.S. Selection 810-21 of the National Electrical Code pro- vides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrodes.

16.An outside antenna system should not be located in the vicini- ty of overhead power lines or other electrical light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or cir-

cuits as contact with them might be fatal.

EXAMPLE OF ANTENNA GROUNDING ACCORDING

TO NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

Please read before operating your HDTV! Weight: 20 lbs (w/stand)

12. Use only with the cart, stand, tripod, bracket,

PROTECTING THE LCD SCREEN

CAUTION: The screen can be damaged if it is not maintained properly.

• Do not use hard objects such as hard

cloth or paper to clean the screen.

• Do not use excessive pressure when

cleaning the screen; excessive pressure

can cause permanent discoloration or

dark spots.

POSITIONING THE HDTV

• Always use a firm and flat surface when

positioning your HDTV.

• Do not position the unit in a confined

area.

• Allow adequate space for proper venti-

lation.

• Do not position the HDTV where it is

easily reachable by small children and

may present risk of injury.

Dimensions _________________________

	WIDTH	HEIGHT	DEPTH
w/stand	31.3	21.6	9.1
w/out stand		19.6	4.5

NOTE: Dimensions are in inches

CONTAINS MERCURY LAMPS, DISPOSE OF PROPERLY

or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate nor- mally, or has been dropped.

“Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the build- ing, as close to the point of cable entry as practical.”

17.Wall or Ceiling Mounting—The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

18.Apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on it.

19.When the MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable.

• NEVER spray liquids on the screen.

HANDLING PRECAUTIONS

• Handle by the cabinet only.

• Handling by two or more people is rec-

ommended.

• Never touch the screen when handling.

• Once HDTV is positioned, remove the

protective film covering front cabinet.

The American Academy of Pediatrics dis- courages media use by children younger than two years. For more information, visit www.aap.org.

SANYO television customers

should contact MRM Recycling at 888-769-0149 or visit their website at www . mrmrecycling . com regarding SANYO’s waste management plan.

FCC INFORMATION ________________________________________________

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gen- erates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harm- ful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

• Handling damage is not covered under

warranty.

ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency (EPA). ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

• Do not remove the protective film

covering the front cabinet while Changes to default as-shipped television configuration and settings or enabling certain optional

handling the HDTV.features and functionalities will change the energy consumption of the television, this may increase energy consumption beyond the limits required for ENERGY STAR qualification.

CAUTION: FCC Regulations state that improper modifications or unauthorized changes to this unit may void the user’s authority to operate the unit.

This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

GETTING STARTED

STAND ASSEMBLY ______

NOTE: Skip these steps if you are wall mounting the TV.

BATTERY INSTALLATION

Install two (2) “AAA” batteries in the remote control. (Not included)

INITIAL CHANNEL SEARCH

Before proceeding, please make sure to correctly hook up your antenna or cable connection and

HDTV INPUT/OUTPUT REFERENCE ________________________________________

1HDMI (INPUT1 or INPUT2)

1 Place HDTV face down on a padded or cushioned flat surface to protect the screen and finish.

2Carefully insert the stand base to the bottom of the HDTV and secure it by inserting four (4) screws as indicated in the diagram below.

NOTE: Stand base screws are located

in the literature package.

PRECAUTIONS:

•Replace both batteries at the same time. Do not use a new battery with a used battery.

•There’s a risk of explosion if a battery is replaced by an incorrect type.

•Keep away from moisture.

•Be sure to match the “+” and “–”signs on the batteries with marks inside the remote control.

•Please properly dispose of used up batteries.

all AV equipment to your HDTV.

1. PLUG IN AC POWER CORD

120V AC, 60Hz

2. TURN ON TV

3. TV SET LOCATION SELECTION:

Select “Home Mode” to set the

HDTV’s backlight to an Energy Star

qualified level, or select “Store

Mode” to set the backlight to a retail

display level.

4. CHANNEL AND SIGNAL SEARCH:

Use HDMI INPUT1 & 2 to hookup HD digital devices such as a Blu-ray player, HD Cable Box, HD Satellite Receiver or Video-game System.

Connect your digital device’s HDMI output to any of the two

(2)HDMI inputs on your HDTV with the use of an HDMI cable.

NOTE: A DVI connection is possible via the HDMI (DVI) INPUT1 using an appropriate cable or adapter and connecting the audio to the Stereo Mini AUDIO jack.

2

2 USB

USB input jack is used to connect a USB mass storage device to watch digital images stored in JPEG format.

HDTV SIDE PANEL

HDMI

2

HDMI

1

1

3Position the HDTV on a firm and flat surface with adequate space for proper ventilation.

WALL MOUNTING (OPTIONAL)

Wall mounting of the HDTV must be performed by a skilled person.

If stand base disassembly is required:

1 Place HDTV face down on a padded or cushioned flat surface to protect the screen and finish.

2Remove the four (4) screws secur- ing the foot stand. CAUTION: Hold the stand firmly as you remove the last screw.

Use the four (4) screws included in the literature package to secure the HDTV to a wall mounting kit.

NOTE: Wall mounting kit is not included.

VESA standard interface: 200 x 200

Mounting screws measurements:

M6 (6mm) Diameter, Length—12mm (maximum)

WARNING: The batteries (or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.

ANTENNA CONNECTION FOR OFF-AIR SIGNALS OR CABLE

Hook up your antenna or your cable service to the HDTV’s ANT terminal with the use of a 75 OHM coaxial cable.

NOTE: Keep your indoor antenna at least 3 ft. away from the televi- sion set and any other electron- ic equipment.

ANTENNA

ANALOG / DIGITAL

ANTENNA IN

CABLE

The tuner in this HDTV can receive:

•Digital and Analog off air signals from an antenna

•Analog or ClearQAM cable channels from a direct Cable TV connection.

Select “Signal Search” and press

ENTER to perform a channel search

from an Antenna or a direct Cable

connection, and a signal search

from devices hooked up to the

HDTV’s AV input jacks.

5. SIGNAL SEARCH RESULT SCREEN

The final setup screen displays ana-

log and digital channels found, as

well as AV inputs detected.

Select Finish Setup and press

ENTER.

NOTE: If you wish to repeat the

process, select Repeat.

Channel Search Result: Succesfully Completed

Analog Channels 16		Digital Channels 26
Video 1	Video 2	HDMI 1	HDMI 2

Finish Setup Repeat

If you are having problems, call us toll-free at 1-800-877-5032

AV INPUT SELECTION

Press the INPUT key to select the correct AV input for the video source you wish to watch.

NOTE: Unused AV inputs may be dis- abled with the Input Setting feature.

3	AUDIO mini stereo jack (3.5mm)		3
	For AUDIO signal from DVI device.
4	Digital Audio Output (Coaxial)	DIGITAL		4
		AUDIO

Hookup a multichannel receiver with the use of a phono-	OUTPUT
type digital audio cable.

5Analog / Digital Antenna Input

Hook up your indoor or outdoor digital antenna, or a direct	HDTV BACK PANEL
Cable service (Analog or ClearQAM).

5

6VIDEO INPUT2

Green (Y), blue (Pb), and red (Pr) Video inputs plus the
white and red Audio inputs.
COMPONENT connection will accept SDTV, EDTV and
HDTV video signals. Use it for great image quality from di-
gital devices such as a DVD player or Video Game system.	6
Match your digital device’s Component output jacks to the
	7
Component input jack set (VIDEO2) on your HDTV.
NOTE: A composite connection is possible via VIDEO INPUT2
using the Y (VIDEO) jack and the L/R audio jacks (see
Video2 Setting.)

7VIDEO INPUT1

Composite yellow (Video), plus white and red (Audio) input jacks.

COMPOSITE connections are used to hookup your analog equipment such as a VCR or an older DVD player.

NOTE: Match the color of your device’s output jack, the con-	Sanyo Manufacturing Corp. 3333
nector and the HDTV’s input jack.
	Sanyo Road, Forrest City, AR 72335
	Printed in Mexico, February 2012
	US2P / 32-Z6TE / GXBM

Need help? www.sanyoctv.com 1-800-877-5032 Need help? www.sanyoctv.com 1-800-877-5032