Sanyo DS27820 USING THE AUDIO OUTPUT JACKS

CONNECTING A SATELLITE SYSTEM AND CABLE TO THE TV

1. Connect signal (cable or antenna) to the TV 75 Ω (ohm) terminal ❶.

2.Connect Satellite S-Video Out to TV S-Video In jack.

Using the S-Video In jack overrides the Video1 Input jack.

3.Connect the Satellite Audio Out (R/L) jacks to TV Audio Input (R/L) Jacks. Press POWER key to turn on the TV. Turn on external equipment.

Satellite	CATV IN		A/V JACKS
	CH3
Receiver	CH4				IN FROM
	OUT TO TV	OUT		S-VIDEO
Back					SAT.
			VIDEO L- AUDIO-R		❶
		❸		❷	Cable or Antenna
			TV Back		system
					(See page 4.)
				UHF/VHF/CATV
				75Ω	❶
		AUDIO AUDIO VIDEO INPUT
		OUTPUT	AV2	AV1
				VIDEO S-VIDEO
				INPUT
		L		(MONO)
			L	L
			(MONO)	AUDIO
		R	R	R

USING THE AUDIO OUTPUT JACKS

CONNECTING A STEREO AMPLIFIER TO AUDIO OUT JACKS

1. Connect the TV Audio Output (R/L) ❶ to the Stereo Amplifier In (R/L) ❷.

2.Press POWER to turn on the TV. Turn on external equipment. Note: Cables are not supplied with TV.

UHF/VHF/CATV 75Ω

❶	AUDIO	AUDIO VIDEO INPUT
	OUTPUT	AV2	AV1
			VIDEO	S-VIDEO
				INPUT
	L		(MONO)
		L	L
		(MONO)	AUDIO
❷	R	R	R

TV Back

Stereo Amplifier

QuickTips

■Always match cables according to the

colors;	RED	for right
audio,	WHITE	for left
audio and	YELLOW for
video.

■Make sure all cable connectors are fully seated on the jacks.

■Make sure you select TV channel to match your VCR output (Ch. 3 or 4). See chart on page 15.

■To view two TV programs or watch a TV program and pre- recorded tape at the same time, follow steps on page 14.

■If you are connecting your TV to a satellite dish, you must connect a cable system or antenna with the satellite to use the PIP feature.

■Position your TV at least 2 feet from stereo speakers. The magnets in the speakers may affect the picture quality.

■Do not connect external speakers directly to the TV.

Need help?

Visit our Web site at

www.sanyoctv.com

or Call 1-800-877-5032

13