Sanyo DS32920, DS36930 Using the Multimedia Remote Control, Remote Control Keys, VCR key, DVD key

USING THE MULTIMEDIA REMOTE CONTROL

Operates your TV, VCR, DVD, Cable converter box, and Satellite Receiver. To program the remote control, see pages 9 ~ 11.

INSTALL BATTERIES AS SHOWN (2 AA, not included)

Notes:

–Do not mix old batteries with new ones or mix different types of batteries together.

–Remove the batteries if the remote control will not be used for a month or more. Weak batteries may leak and cause damage. (Normal battery life is roughly six months.)

IMPORTANT NOTE: Spent or discharged batteries must be recycled or disposed of properly in compliance with all applicable laws. For detailed information, contact your local County Solid Waste Authority.

QuickTips

■ Be sure batteries are
	installed correctly.
■	Point the remote
	control toward the
	equipment you want to
	operate. Objects bet-
	ween the remote
	control and the equip-
	ment may cause
	misoperation of the
	remote control
	function.
■ If the remote control
	does not work: Press
	TV key (see item 1).
■	The remote control

REMOTE CONTROL KEYS

➀Mode Keys— Use these keys to program the remote control and to select the operating mode

( VCR ,TV ,CABLE, DVD, SAT		, or AUX ). To
Operate Your... VCR—Press the				VCR key;
Television—Press the	TV key; Cable Box—Press
the CABLE key; DVD Player—Press the				DVD key;
and Satellite Receiver—Press the			SAT key.
Note: Make sure you hold		down		the mode key
while entering a code number, see page 9			.

➁Input Key— In the TV and Satellite modes, this key selects the program source to display on the

screen (TV signal or signal from equipment con- nected to the AV jacks). In the VCR mode, this key functions as a VCR’s TV/ VCR key.

➂Number Keys— Two keys must be pressed to select

a channel.	Example	: Press	0 then	6 to select channel
6. For cable channels 100 through 125				, press and
hold the	1 key until	C1– –	appears. Then	press the
other two numbers.
➃Caption Key	—See page 17.

➀	VCR	TV	CABLE
	DVD	SAT AUX
➁	INPUT	POWER	RESET
	1	2	3
➂	4	5	6
➃	7	8	9
	CAPTION	0	SLEEP
	MENU		RECALL

CH

VOLVOL

CH

MUTEDISPLAY

	must be programmed
	before it will operate
	your VCR, DVD
	Player, Satellite
	Receiver, or Cable
	Box. See pages 9~11.
	Note: Sanyo’s VCR
	and DVD codes are
	preprogrammed.
■	Cannot select
	channel with number
	keys. Press “0”in
	front of numbers 1~9.
	Example: Channel 05.
■	Adjusting the volume
	level: Flashing Right
	▲ arrow indicates
	volume is increasing
	and flashing Left
	▲ arrow indicates
	volume is decreasing.

Need help?

Visit our Web site at

www.sanyoctv.com

or Call 1-800-877-5032

(Continued on page 8.)

7