The adjustment mode will change in the following order:

Volume Bass Treble Balance Fader

By pressing VOL button + (11) or VOL button – (12), it is possible to adjust the desired sound level.

•LOUDNESS

Press BND/LOU button (13) for several seconds to reinforce the bass output and display will show “LOUD”. Press it for several seconds again to release this function.

•SET THE CLOCK

Press the DSP button (15), the clock is shown on the LCD display. Then hold down the button until the clock flashes. Then press the MANU/SKIP button (17) to change hours or MANU/SKIP button (16) to change minutes.

•SELECT MODE

Press MOD button (6) shortly to choose desired listening mode. [e.g. radio mode to CD mode to AUX mode]

•MUTE

Press MUT button (3) to mute the sound instantly. If any button is pressed in the mute state, the mute mode is released.

•LIQUID CRYSTAL DISPLAY

Exhibit current frequency and activated functions on the display (8).

•EQUALIZATION

Press EQ button (19) to turn on equalization function and to select desired audio mode. There are five kinds of mode as below:

FLAT CLASSICS POP M ROCK M DSP OFF

•AUXILIARY INPUT

The unit can be connected to a portable audio player through the AUX IN jack (24). To hear the input signal, press MOD (6) button several times until the display shows “AUX”.

•FLASHING LED

If the front panel is not installed in the main unit, the LED (25) will be flashing.

•RESET

RESET button (26) can be activated with either a ball point pen or thin metal object. RESET button (26) is to be activated for the following reasons:

-Initial installation of the unit when all wiring is completed.

-All the function buttons do not operate.

-Error symbol on the display.

7