ATP (AUTO TRAVEL PRESET) OPERATION................ | 4 |
The Auto Travel Preset function searches for and memorizes the 6 strongest stations in one of the two bands (FM, AM) in the order of signal strength.
This feature is useful when you are driving in an unfamiliar location and want to memorize local stations without changing the standard preset stations.
A total of 12 stations (6 FM and 6 AM) can be programmed.
• To set the stations............................... | 1 | Select the desired band. |
| 2 | Press and hold the ATP button for more than 2 seconds. |
|
| “ATP” appears in the display. |
|
| When the stations have been memorized, scanning stops and the |
|
| strongest station is selected. |
• Quick Tuning of ATP Stations ................. | 1 | Select the desired band. |
2Press the ATP button if the “ATP” indicator does not appear in the display.
3While ATP is illuminated, press the ATP button and the unit seeks
•To scan programmed stations............. See
Notes
•If no station can be received, “- 0
•If fewer than 6 stations can be received, the system will memorize as many stations as possible, then select the strongest one.
•If ATP mode is selected in FMII band, FMI ATP mode is selected.
To cancel the ATP, press the BND button . When ATP is canceled, the ATP indicator disappears and ATP mode is canceled.
| 1, 4 |
This function scans each of the preset stations stored in the selected band (both manual preset and auto travel presets).
1Select the desired band or ATP mode.
Press the BND button for FMI, FMII or AM. Press the ATP button to select the ATP mode.
2Press the BND button for more than 2 seconds. The system will select and receive each preset station for
3To stop scanning and retain the station currently selected, press the BND button again during this