Speaker connection
Note:
4Unplug the LCD display and all connected
component before connecting the speakers.
4The illustration may be different depending on
model.
Connect the speaker audio cable to the external
speaker output jack on the unit matching the "+" and "-"
ends of the cable with color.
INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may
cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
Optimum reception of colour requires a good signal and will generally mean that an outdoor antenna must be used. The exact type
and position of the antenna will depend upon your particular area.
It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio wave
conditions.The antenna cable should not be bundled with the power cord and the like.
Note:
Antenna Connection
Preparations (continued)
5
RF
（Black）
（Red）
（Right speaker） （Left speaker）
（Red）
（Black）
Downloaded From TV-Manual.com Manuals