55
28
TEMPERATURE RECORDER (Option)
When a 7-day circular type recorder is installed, a slip chart recorder can not be attached.
Follow the procedure bellow to attach a 7-day circular chart recorder to the freezer.
NOTE: Only a specified recorder is applicable to the freezer. For the selection of an applicable recorder,
please consult with a sales representative or agent.
1. Make sure that all the switches including power supply are
turned off.
2. Remove the side cover by loosening four screws. (Fig.1)
3. After removing a grille screw, open the grille as shown in Fig. 1.
4. Remove the control panel by loosening two screws on the
lower outside (A) and upper inside (B) of the control panel.
(Fig. 1)
5. Detach the cover on the control panel by removing four
screws. (Fig. 1)
6. As shown in Fig.2, secure the temperature recorder to the
control panel using with the fixing kit.
7. Replace the control panel with the recorder attached and fix
the panel with screws. (Fig. 3)
Fig. 1
Control Panel
7DAY CIRCULAR
CHART RECORDER
Fig. 2
Fig. 3