Sanyo MPR-1013R, MPR-513R instruction manual Attachment of recorder MTR-G04

OPTIONAL COMPONENTS

Attachment of recorder MTR-G04

WARNING

Always disconnect the power supply plug before installing an automatic temperature recorder in order to prevent electric shock or injury.

1.Follow the instruction manual provided with the temperature recorder and attach the recorder to the fixture MPR-S7.

2.Open the cover for recorder attachment space by removing the screw.

3.Remove the cover by pushing the shaft on both side outward. See Fig. 1.

4.As shown in Fig. 2, attach the temperature recorder to the fixture with enclosed screws.

5.Remove two screws fixing the plate for air intake vent (far right side) and remove the plate.

6.Lead the sensor of the recorder in the chamber through the hole after taking out the thermal insulation from it as shown in Fig. 3.

7.Fix the recorder sensor to the sensor fixture as shown in Fig. 4.

8.Connect the connector on recorder with that on the unit. See Fig. 5

9.After installing the bottom cut of the fixture on the shaft, secure the fixture by screws.

10.Return the thermal insulation and then attach the plate for air intake vent to the original place.

shaftscrew

cover

Fig. 1

MTR-G04

MPR-S7 Fig. 2

Fig. 3

	fixture
sensor	Fig. 4

connector

Fig. 5

14