AA/AAA USB Charger Ni-MH
Operating Instructions Model:
Features
•This is a small and slim eneloop charger for AA and AAA eneloop batteries.
•One or two AA or AAA eneloop batteries can be charged.
•No AC adapter is required.
Operating Instructions
HOW TO CHARGE
1. Insert one or two eneloop batteries into the charger. Raise or lower |
the adjuster depending on the type of battery to be charged. |
• Raise the adjuster to charge AA batteries. |
• Lower the adjuster to charge AAA batteries. |
• AA and AAA batteries cannot be charged at the same time. |
Cautions for Battery Charger Usage
WARNING!
•This charger is only for AA and AAA
•Do not attempt to charge alkaline batteries.
• Do not connect equipment to other USB ports while
Thank you for purchasing this SANYO product. For safe and correct use, please read these instructions carefully. Please keep the instructions for later reference.
PARTS DESCRIPTION
LED Charge indicator
Note: Insert the batteries matching the polarity of the charger. |
2. Insert the USB connector of the charger into the USB port of an |
operating computer. Charging takes place when the LED charge |
Indicator is flashing. |
charging. The available power required may be exceeded and the computer may be damaged or data may be lost.
• Do not connect via a USB connection cable. This may
Specifications
SANYO Model No.
Input
Output
Battery charge times (approx. minutes)*
NC-MDU01
DC 5 V, max. 500 mA
DC 1.2 V, 850 mA x 1 (Quick), 450 mA x 2
eneloop
eneloop
Adjuster (+) 
Raise for AA 
Lower for AA
and AAA
connector
housing
Note: Do not connect other equipment to other USB ports on the |
computer while charging or the required Power may be exceeded. |
Charging might be stopped or the computer damaged or Data lost. |
The power supply capacity may be exceeded and charging may |
become impossible or the computer may be damaged and important |
data may be lost. |
3. When charging has been completed the LED Charge indicator |
remains lit. Remove the USB connector from the USB port of the |
computer and remove the battery (batteries). |
• Directly after completion of charging, the battery is hot, but this |
is normal. |
cause interference with other electrical equipment.
•Do not use the charger in areas of high humidity or where it may be exposed to water.
•Insert the batteries into the charger with matched
polarity.
• Disconnect the charger from the port after completion of charging.
• Lower the adjuster when the charger is not being used. Put the USB connector into USB housing of the
(*)Guideline value only; actual charging times may vary slightly. Please refer to Operating Instructions.
Note: If the adjuster has been raised, lower the adjuster for storage.
charger.
• Do not pull the USB connector and the cord
Dimensions (L x W x H)
Weight
Charging temperature
range
Connector type
Compatible computer models
93 x 47 x 17.5 mm
Approx. 47 g
0 °C – 40 °C
USB type A
Models with a USB port as standard equipment where the computer manufacturer guarantees the operation of the USB port and has a USB port fitted as Standard equipment.
HOW TO I
Depending on whether the adjuster is raised or not, one or two AA o
Raise the a
A batteries
The following can be considered when the charge time is exceeded:
(*) Please refer to the instructions for your computer and cancel standby mode.
LED Charge indication light
excessively.
• Do not touch the charger or the batteries with wet hands.
• Use the charger in the temperature range from 0 °C to 40 °C.
• Do not insert Metallic objects other than eneloop batteries into the charger.
• Do not modify or disassemble the charger.
• In case of abnormalities or trouble, disconnect the USB connector from the computer port and contact
Temperature range
Discharging (battery use) | |
Charging | 0 °C – 40 °C |
Storage |
Usage outside of these temperature ranges may decrease the performance and/or the life of the battery.
– – – – – – – – Approx. every 1.5 sec | Charging | |
Steady | Charging completed (*) | |
- - - - - - - - - - - Approx. every 0.5 sec | Battery abnormal | |
Not lit |
| Stop during charging (computer |
|
| standby mode etc.) |
(*)When two batteries are being charged, the condition where charging of both batteries has been completed.
your dealer.
• Keep the charger out of reach of small children. If children are to use the charger, keep them under observation.
• Do not store the charger in locations with high humidity or dust.
