For customer service issues, please call
Parts and usage
| Call GE SANYO at (866) |
Charger Model | c/o XWG, 1840 County Line Road Huntingdon Valley, PA 19006 |
sanyo@accessoryhelp.info • www.sanyobatteries.com |
Notes on Safety (Please read for proper use.)
With this charger, you can charge up to 4 AA or 4AAA eneloop
How to charge
1) | This charger is designed to charge 2 or 4 pcs of AA or AAA |
charged at the same time. | |
2) | If you want to charge 4 pcs of AA or AAA, put batteries into the |
charger compartments, taking care to observe polarity | |
Severity of symbol
Danger - Very close to causing death or heavy damage to human body.
Warning - May cause death or heavy damage to human body.
Caution - May cause heavy damage to human body or property damage.
Example of the symbols
This symbol is to inform that the action written inside of the symbol is prohibited. (Left is to prohibit you from taking apart)
Safety issues of charger
Danger
Use under the specified voltage
Regarding eneloop Ni-MH batteries
Please follow the instructions below to avoid damage or injury.
Danger
•Do not dispose of in fire. Do not heat, deform, solder, dissamble or modify.
•Do not insert batteries with the (+) and
•If leaked liquid gets in the eyes, wash them with clean water and consult a doctor immediately.
•Batteries should not be used in underwater lighting or in sealed electronic devices.
Warning
•Do not connect the (+) and
AAA
AA
Charge indicator light
• Flashes when charging.
• Turns on when charging is complete.
How to insert and remove battery
How to insert
• Match the + and – terminal of the battery with the charger’s + and
– contact surface.
• For AA battery, insert from the + terminal and push on the
– terminal.
indicated inside the charger. |
3) If only charging 2 batteries at a time, place the batteries in the |
left or right side compartments of the charger. |
Please use under AC100V to 240V. Otherwise, may cause high heat, fire breakout, electric shock, or harm to human body.
Warning
Do not allow metal objects come into contact with charger. May cause electric shock, excessive heat, or fire.
•Children should be supervised while handling the batteries.
•Do not peel off or damage the outer tube.
•If leaked liquid gets on the skin or clothing, wash off with clean water immediately.
•Do not connect 10 batteries or more in series.
Caution
• For AAA battery, insert from
– terminal as in the picture, then |
place + terminal into + contact surface. |
How to remove |
• For AA battery, take out from |
– terminal. |
• For AAA battery, if pushed on |
4) | Swing plug out and plug into |
5) | Confirm that the indication lights begin to flash. Do not plug in |
upside down. If plugged in upside down, it will finish charging | |
before it is fully charged. | |
6) | When charging is complete, the indicator lights will turn on |
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Do not charge
Caution
May deform charger causing high heat, leakage, or explosion.
Do not place heavy objects on top of the charger. Avoid unstable locations like areas with strong magnetic fields or dust. May cause excessive heat or fire.
Charger should be used between 41°F to 95°F. If ambient temperature is higher, charger may cause the battery to leak or rupture.
Charging Safety
Operating temperature range for Ni-MH battery eneloop
• Discharge | 23°F to 122°F |
• Recharge | 41°F to 95°F |
• Store | - 4°F to 86°F |
•Outside of the indicated range, battery’s performance and
Do not use these batteries together with dry cells, other types of batteries, new or old batteries together, or batteries with different charge levels.
Correctly use “eneloop”
Ni-MH battery
About Charging
Depending upon storage condition, typically eneloop does not need to be recharged for the first time if used within 2 years from the manufactured date. However, there may be a time when some digital cameras may display the low battery indicator. In these cases, please recharge.
the + side, - side will pop out | |
for easy removal. | How to insert a AAA battery |
| Spec |
Input | Size |
| 118 x 72 x 32.5 mm | |||
Output | AA - 2/4 x 1.2V — 300mA | Weight |
| ~ 98g | ||
| AAA - 2/4 x 1.2V — 150mA | Temp. range | 41°F – 95°F | |||
Suitable Battery |
|
| Charge time | |||
|
| 1 – 4 battery | ||||
|
|
|
|
| ||
| AA | Approx. 10 hours | ||||
battery |
| Min. 1900mAh*) |
|
| ||
|
|
|
|
| ||
eneloop | AAA | Approx. 7 hours | ||||
|
| |||||
|
| Min. 750mAh*) |
|
|
|
|
Charge time is the time it takes to charge a fully discharged battery. The charge time will depend on the remaining charge in the battery and the ambient temperature.
Indication light
constantly. Refer to charging chart for typical charge time. |
7) After charging is done, unplug the charger from the outlet and |
swing plug back into place. |
How to assemble C or D battery
• Match the + and – terminal of a AA eneloop battery with the |
spacer’s + and – terminals. |
Do not charge near hot temperatures like an electric blanket, stove, near direct sunlight, inside of a car, or under hot sun, etc. In addition, please do not cover the charger with a blanket. In such cases, battery would not be fully charged because the temperature inside of the charger will become hot, and the safety protective function will be activated and stop charging.
Please charge at temperature between 41°F to 95°F.
Please recycle used rechargeable batteries.
All rechargeable batteries contain precious resources that can be reused. To learn more about recycling or to find a
* All statements concerning capacity (mAh) or the life of the battery (cycle |
life) are based on |
Appearance Status
Indicator lights flashing | Charging | |
properly | ||
| ||
Indicator lights are on | Finish | |
charging | ||
Indicator lights are off | Default | |
| mode |
Handling
Normal
Batteries are ready for use
a) No battery put inside charger |
b) Battery connected incorrectly |
c) The charger has internal failure |
• Insert the + terminal of the AA eneloop battery into the – end of |
the spacer. |
• Push the AA battery until it “snaps” into place. |
• To remove, push on the + terminal of the AA eneloop battery |
until it releases. |
* Statements concerning long term storage is based on simulations at room |
temperature. |
d) Power off |
C or D spacer
AA battery
