11
MENU OPERATION

Picture menu

■ Advanced settings

Use the 5 or 6 button to select Advance d settings and press
the 1 or 2 button to enter the sub menu as follows.
DCDi (Directional Correlational De interlacing) is used to process
moving angled edge in deinterlacing to get the smo othest and most
natural image. Press the 1 or 2 button on the rem ote control to
select On or Off.
ACC/ACM (ACC: Adaptive Contrast and Color; ACM-II: Act ive Color
Management-II) is used to select adaptive Brig htness, Contrast and
tone control. Press the 1 or 2 button on the r emote control to
select suitable mode either Vivid, Cin ema, Sport or Off.
CCS (Cross Color Separation) is used to remove residual chr oma
information from luminance signal which i s the result of imperfect
decoding of composite video. Press the 1 or 2 bu tton on the
remote control to select either Auto, Stan dard or Off.
DNR (Digital Noise Reduction) is available for nois e reduction. Press
the 1 or 2 button on the remote control to sel ect either Auto,
Low, Mid, High or Off.
MPEG NR (MPEG Noise Reduction): Removes unwanted ringing and
block noise from images that have undergone MPEG or J PEG com-
pression and decompression. Press the 1 or 2 b utton on the
remote control to select On or Off.
Film Mode (Inverse 3:2 pulldown): Film vs.Video-Detect lm. Performed
on material which underwent technologic conversion to video. Press the
1 or 2 button on the remote control to select On or Off.

Sound menu

Press the MENU button and select So und using the 5 or 6 buttons,
press the 1 or 2 button to enter.
Select and adjust to obtain the best sound setti ngs for your environ-
ment using the 5 or 6 button to select Treble, Bass o r Balance
and the 1 or 2 button to adjust levels.
Bass Expander can also be selec ted using the 5 or 6 button
and pressing the 1 or 2 button to select On o r Off.
These settings automatically store when yo u exit the menu.
Press the BACK button to return to the previous me nu.
Press the MENU button to exit menu operat ion.

Time menu

Press the MENU button and select Ti me using the 5 or 6 but-
tons, press the 1 or 2 button to enter. Press the BACK but-
ton to return to the previous menu. Press the MENU but ton to exit
menu operation.

■ Current Weekday

Use to set current weekday using the 1 or 2 button.

■ Current Time

Use to set the current time using the Numeric but tons.
✐ Other items in Time Menu should not be selected until Current
Time has been set.

■ Schedule

Use to set up to 20 separate time schedules for “Power On” o r “Power
Off”, select 1 ~ 20 using the 1 or 2 butto n.

■ Weekday

Use to set the schedule for “Power On” or “Power Of f” of any weekday
from Sunday through to Saturday or Everyday using the 1 or 2
button.

■ Time

Use to set the schedule for “Power On” or “Power Of f” of any time us-
ing the Numeric buttons.

■ Action

Use to set the schedule for “Power On” or “Power Of f” active using
the 1 or 2 button.
You can set Power On timer in Time menu selecting “ON” in “O n
Timer Function” in Installation Mode. If it is selec ted “OFF”, Power On
display in Time menu does not functional.

■ On Program

Use to select AV1, RGB, AV2, AV3, PC, DVI or Network for the
schedule of “Power On” using the 1 or 2 button.

■ Active

Use to select ON or OFF using the 1 or 2 button. W hen set
“OFF” the above items “Schedule”, “Weekday”, “Time”, “Action” or “ON
Program” will be inactive.
Use NUMERIC buttons [0 ~ 9] to set On T ime. (Action “Power On”
– 00:00 ~ 23:59)
✐ Once On Time has been set, when the set time is reached, the
monitor will leave the stand-by status and enter to th e source
automatically.
✐ After On Time has been set, you can go on watching other pro-
grams. When the set time is reached, the monitor wi ll automatically
switch to the preset program.
✐ On Program can only be selected whenAction (Power On) has
been set.
✐ Action (Power Off) can be set to turn the monitor into standby at a
selected time
Once On Program has been set, when the set time is re ached, the
monitor will enter to the preset source automatic ally.
Use the 1 or 2 button to select On progr am, AV1, RGB, AV2,
AV3, PC, DVI or Network.

Setup menu

Press the MENU button and select Set up using the 5 or 6 but-
tons, press the 1 or 2 button to enter. Press the BACK but-
ton to return to the previous menu. Press the MENU but ton to exit.
XGA Mode

■ Menu Setup

Whenever Setup menu is accessed initially, Menu Setup will be the
default selection. Press the 1 or 2 button to enter the sub menu.
GB GB
Downloaded From TV-Manual.com Manuals