COMPUTER MODE

PICTURE SCREEN ADJUSTMENT

This projector has a picture screen resize function, which enables you to display the desirable image size.

1

 

Press the MENU button and the ON-SCREEN MENU will

 

 

appear. Press the POINT LEFT/RIGHT buttons to select

 

 

SCREEN and press the SELECT (REAR CLICK) button.

 

 

Another dialog box PICTURE SCREEN Menu will appear.

2

 

 

 

Press the POINT DOWN button and a red-arrow icon will

 

appear. Move the arrow to the function that you want to select

and then press SELECT (REAR CLICK) button.

True

To make the image into its original size, select True in the dialog box. When the original image size is larger than the screen size (1280 x 1024), the image can be panned by pressing the POINT UP/DOWN/LEFT/RIGHT buttons.

Digital Zoom

To adjust the image size or pan the image, select Digital zoom in the dialog box. The ON-SCREEN menu and SCREEN ADJUST menu disappears, and the magnifying glass icon and the message “D. Zoom” is displayed.

This projector also enters Digital Zoom mode by pressing the Select (REAR CLICK) and FRONT CLICK buttons on the Wireless Remote Control Unit.

Refer to the following for operation.

Expand function

To expand the image size, press the SELECT (REAR CLICK) button. The image is magnified by degrees.

Compress function

To compress the image size, press the FRONT CLICK button. The size of image is reduced by degrees.

Panning function

To pan the image, press the POINT UP/DOWN/LEFT/RIGHT buttons. Panning function can work only when the image is larger than the screen size.

To cancel Digital Zoom mode, press any button except SELECT (REAR CLICK), FRONT CLICK, or POINT button. To adjust the image to 1280 x 1024, press NORMAL button.

Move the arrow to the function and press the

SELECT (REAR CLICK) button.

NOTE

●The True and the Digital Zoom cannot be operated when “RGB,” “HDTV1035i” or “HDTV1080i” is selected on the SYSTEM MENU (P36 and 37).

●This projector cannot display any resolution higher than 1600 X 1200. If your computer’s screen resolution is higher than 1600 X 1200, reset the resolution to the lower before connecting the projector.

●The image data in other than 1280 x 1024 is modified to fit the screen size in the initial mode.

●The normal "Panning Operation" may not function properly if the computer system prepared with the "PC Adjust" is used.

43